⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Adams County

Adams County, Wisconsin: well depth, water level & drilling cost

✓ 13,812 WI DNR records · verified 2026-06-30

62 ftmedian well depth
51 ft–80 fttypical depth range
24 ftmedian static water level
15 gpmmedian yield (10,780 tests)

How deep are wells in Adams County, Wisconsin?

The median drilled well depth in Adams County is 62 ft, based on 11,185 wells with recorded depths in the state WI DNR database. Half of all wells fall between 51 ft and 80 ft; 90% are shallower than 128 ft. Wells drilled since 2016 have a median depth of 62 ft.

How much does it cost to drill a well in Adams County?

Applying published per-foot rates to the local median depth of 62 ft: drilling and casing alone typically runs $1,550–$4,030; a complete system including pump, pressure tank, and hookup typically runs $3,720–$6,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Adams County?

The median static water level is 24 ft below ground surface (middle half of wells: 15 ft–36 ft), from 11,132 measurements.

How much water do wells in Adams County produce?

The median tested yield is 15 gpm (middle half: 10 gpm–20 gpm), from 10,780 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Adams County address — $19

Drilled depth distribution

0–50 ft 2,472 50–100 ft 6,716 100–150 ft 1,288 150–200 ft 473 200–300 ft 213 300–400 ft 19 400–600 ft 4 600+ ft 0

Who drills wells in Adams County?

Companies by number of wells completed in this county since 2016, per filed well construction reports (Wisconsin DNR).

DrillerWells since 2016
FOSTER'S SEPTIC & WELL SERVICE LLC464
SAM'S WELL DRILLING INC299
MARSHALL WELL DRILLING CORP295
ROTH WELL DRILLING293
BERTRAM JUNEMANN WELL DRILLING INC247
WALKER, BRUCE A221
REICHHOFF, RODNEY J173
QUINNELLS SEPTIC & WELL SERVICE INC134

Get quotes from local drillers

Looking at a specific property in Adams County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.