⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Jackson County

Jackson County, Wisconsin: well depth, water level & drilling cost

✓ 5,727 WI DNR records · verified 2026-06-30

78 ftmedian well depth
58 ft–105 fttypical depth range
31 ftmedian static water level
12 gpmmedian yield (3,763 tests)

How deep are wells in Jackson County, Wisconsin?

The median drilled well depth in Jackson County is 78 ft, based on 3,795 wells with recorded depths in the state WI DNR database. Half of all wells fall between 58 ft and 105 ft; 90% are shallower than 150 ft. Wells drilled since 2016 have a median depth of 80 ft.

How much does it cost to drill a well in Jackson County?

Applying published per-foot rates to the local median depth of 80 ft: drilling and casing alone typically runs $2,000–$5,200; a complete system including pump, pressure tank, and hookup typically runs $4,800–$8,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Jackson County?

The median static water level is 31 ft below ground surface (middle half of wells: 17 ft–55 ft), from 3,779 measurements.

How much water do wells in Jackson County produce?

The median tested yield is 12 gpm (middle half: 10 gpm–15 gpm), from 3,763 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Jackson County address — $19

Drilled depth distribution

0–50 ft 591 50–100 ft 1,986 100–150 ft 834 150–200 ft 206 200–300 ft 153 300–400 ft 21 400–600 ft 3 600+ ft 1

Who drills wells in Jackson County?

Companies by number of wells completed in this county since 2016, per filed well construction reports (Wisconsin DNR).

DrillerWells since 2016
RUSH WELL DRILLING LLC106
RUSH, JON A93
OIUM, KELLY WELL DRILLING INC74
HEEG WELL AND PUMP LLC68
H2O WELL DRILLING & PUMP SERVICE67
H2O WELL DRILLING & PUMP SERVICE LLC58
FEDIE, DONALD S51
PELKE PLBG & WELL DRLG INC32

Get quotes from local drillers

Looking at a specific property in Jackson County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.