Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Kewaunee County

Kewaunee County, Wisconsin: well depth, water level & drilling cost

✓ 4,437 WI DNR records · verified 2026-06-30

160 ftmedian well depth
123 ft–203 fttypical depth range
30 ftmedian static water level
20 gpmmedian yield (2,438 tests)

How deep are wells in Kewaunee County, Wisconsin?

The median drilled well depth in Kewaunee County is 160 ft, based on 2,518 wells with recorded depths in the state WI DNR database. Half of all wells fall between 123 ft and 203 ft; 90% are shallower than 264 ft. Wells drilled since 2016 have a median depth of 163 ft.

How much does it cost to drill a well in Kewaunee County?

Applying published per-foot rates to the local median depth of 163 ft: drilling and casing alone typically runs $4,075–$10,595; a complete system including pump, pressure tank, and hookup typically runs $9,780–$16,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Kewaunee County?

The median static water level is 30 ft below ground surface (middle half of wells: 17 ft–50 ft), from 2,459 measurements.

How much water do wells in Kewaunee County produce?

The median tested yield is 20 gpm (middle half: 15 gpm–30 gpm), from 2,438 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Kewaunee County address — $19

Drilled depth distribution

0–50 ft 4 50–100 ft 157 100–150 ft 1,029 150–200 ft 500 200–300 ft 630 300–400 ft 140 400–600 ft 32 600+ ft 26

Who drills wells in Kewaunee County?

Companies by number of wells completed in this county since 2016, per filed well construction reports (Wisconsin DNR).

DrillerWells since 2016
RETZLAFF & GREGORICH269
VAN DE YACHT LEO WELL DRILLING INC95
GROUND SOURCE INC34
WESLOW WATER SYSTEMS INC13
LUISIER WELL DRILLING INC6
GROUND SOURCE LLC6
HINTZKE WELL DRILLING INC4
EUCLIDE, MARK E3

Get quotes from local drillers

Looking at a specific property in Kewaunee County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.