⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Marinette County

Marinette County, Wisconsin: well depth, water level & drilling cost

✓ 13,284 WI DNR records · verified 2026-06-30

116 ftmedian well depth
75 ft–204 fttypical depth range
24 ftmedian static water level
15 gpmmedian yield (9,456 tests)

How deep are wells in Marinette County, Wisconsin?

The median drilled well depth in Marinette County is 116 ft, based on 9,575 wells with recorded depths in the state WI DNR database. Half of all wells fall between 75 ft and 204 ft; 90% are shallower than 282 ft. Wells drilled since 2016 have a median depth of 123 ft.

How much does it cost to drill a well in Marinette County?

Applying published per-foot rates to the local median depth of 123 ft: drilling and casing alone typically runs $3,075–$7,995; a complete system including pump, pressure tank, and hookup typically runs $7,380–$12,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Marinette County?

The median static water level is 24 ft below ground surface (middle half of wells: 13 ft–40 ft), from 9,632 measurements.

How much water do wells in Marinette County produce?

The median tested yield is 15 gpm (middle half: 7 gpm–21 gpm), from 9,456 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Marinette County address — $19

Drilled depth distribution

0–50 ft 830 50–100 ft 2,960 100–150 ft 2,379 150–200 ft 801 200–300 ft 1,771 300–400 ft 538 400–600 ft 256 600+ ft 40

Who drills wells in Marinette County?

Companies by number of wells completed in this county since 2016, per filed well construction reports (Wisconsin DNR).

DrillerWells since 2016
LUISIER WELL DRILLING INC1,164
VAN DE YACHT LEO WELL DRILLING INC222
WESLOW WATER SYSTEMS INC118
DRILL BABY DRILL LLC97
ARNESON WELL DRILLING LLC74
KOZIKOWSKI WELL & PUMP INC61
MORIN, DOUGLAS J56
GROUND SOURCE INC55

Get quotes from local drillers

Looking at a specific property in Marinette County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.